6. Reports

The supplier shall submit three certified copies of reports indicating the ingot chemistries. In addition, a certification statement will be added stating that although not tested, the material is in conformance with the specification. Additional tests for tensile yield, elongation, grain size and product analysis for oxygen, carbon, and nitrogen as well as other tests will be furnished when negotiated and specified in the purchase order.

7. Preparation for Delivery

7.1 Packaging. All material shall be packaged in a manner that will prevent damage in transit and in storage.

8. Rejections

Material not conforming to any of the requirements of this specification unless otherwise agreed upon by the purchaser.

9. Definitions

For the purposes of this specification, the following definitions shall apply:

9.1 Sheet Sheet is flat, rolled material up to 0.125" thick, and other material not considered strip, normally supplied in widths to 24".

9.2 Plate. Plate is flat, rolled material 0.125" thick or greater.

9.3 Strip. Strip is flat, rolled material up to 0.060" thick in widths under twelve inches (12").

Page 27 of 34 Next

INDEX  •  CORROSION RESISTANCE PROPERTIES  •  FABRICATION   
NIOBIUM PRODUCTS   •  SPECIFICATIONS of NIOBIUM   
NIOBIUM ELECTRONICS APPLICATIONS